Frequently Asked Questions
Check most frequently asked questions here, if you still need help then please contact us.
Product Info - Oil Drip Catcher
The Oil Drip Catcher package includes all hardware needed for installation. Step-by-step instructions are available here.
Product Info - Stake Pocket Covers
Stake Pocket Covers are used to cover the exposed holes in the bed rails of most Chevy, GMC, and Ram pickup trucks. They give the bed a finished look and protect the stake pockets from collecting dirt and water, which can lead to rust. Be sure the stake pockets are clean and dry before installing by tapping in with either your hand or a rubber mallet. For maximum retention and permanent seal, silicone adhesive can be applied to the holes before installing if the Stake Pocket Covers will not need to be removed in the future.
Engineered by Schildmeier Stake Pocket Covers are made of custom color, high quality ABS plastic to match your truck bed and provide UV protection to prevent fading and cracking.
Engineered by Schildmeier Stake Pocket Covers are available for most 2009 and newer, full-size Ram pickup trucks; 2014 and newer, full-size GMC and Chevrolet pickup trucks; and 2015 and newer GMC Canyon and Chevy Colorado smaller pickup trucks.
Please note: Due to variations in trim packages and truck models, there are a few truck models and trims that require a different Stake Pocket Cover model than the one that typically corresponds with the truck's year. Please read the product description for your model year truck to see if your truck may need a different Stake Pocket Cover. Pictures accompanying the product descriptions will help you easily measure your stake pockets to determine which Stake Pocket Covers will fit your truck. If you have any questions about which product to order, please contact us. We are happy to assist you!
To install Stake Pocket Covers, be sure stake pockets are clean and dry before installing. Pound covers in with fist or soft rubber mallet. It's ok to sand the sides a bit if they feel too tight.
Our Stake Pocket Covers are laser-measured to fit precisely and snuggly, so no adhesive should be needed. Some customers do choose to use a little silicone adhesive for extra sealing, but it should not be necessary and should only be done if there is no chance the covers will ever need to be removed.
For Chevy and GMC trucks: Remove Stake Pocket Covers by poking a 1/2" dowel rod about 3' long up from the bottom. For Ram trucks: Poke a 1/2" dowel rod about 6" long up through the nearby access hole from inside of the truck bed.
Yes, our stake pocket covers fit smooth and flush with the top of the bed rail. They are the perfect solution for bed covers where the seal goes over the hole.
Engineered by Schildmeier products are quality designed, manufactured, and inspected, and we stand behind our products 100%. If you receive a product that you believe is defective, does not fit your vehicle, or you are otherwise unhappy with your purchase we will replace it free of charge within 30 days of your purchase.
Shipping anywhere in the U.S. is FREE. Our Stake Pocket Covers are carefully packaged and shipped via USPS First Class mail. Please note, we typically fill all orders within 1 business day of the order being placed. However, due to changes in the US Postal Service, some customers are experiencing longer than anticipated shipping times. Shipping outside the US is $10 USD.